All Rights Reserved
This FAQ may be posted to any USENET newsgroup, on-line service, or BBS as long as it is posted in its entirety and includes this copyright statement.
This FAQ may not be distributed for financial gain.
This FAQ may not be included in commercial collections or compilations without express permission from the author.
From: email@example.com (Vikas Malik) Newsgroups: comp.lang.smalltalk,comp.answers,news.answers Subject: Smalltalk FAQ (v.1.0) Followup-To: poster Approved: news-answers-request@MIT.EDU Archive-name: smalltalk-faq Posting-Frequency: monthly Last-modified: May 14,1996 Version: 1.0 URL: http://www.ipass.net/~vmalik________________________________________________________________________________________________
Q2. What is super?
Ans. super refers to the superclass of the class that defines the message sent to the receiver. Super is mechanism by which a sender can overide its own defined method hierarchy.
Q3. What are three different message types in Smalltalk?
Ans. 1. Unary messages
2. Binary Messages
3. Keyword Messages
Q4. What is shallow copy?
Ans. shallowCopy returns a copy of receiver which shares the receiver's instance variables.
Q5. What is deep copy?
Ans. deepCopy returns a copy of the receiver with shallow copies of each instance variable.
Q6. What are class instance variables?
Ans. Class instance variables are similar to class variables, except that they are created for eachsubclass of the defining class. When a class declares a class instance variable, a new variable is created for each subclass of that class. Each subclass then has its own instance of the variable and retains its own value for the variable, but each subclass has a variable with the same name. Only class methods of a class and its subclasses can refer to class instance variables; instance methods cannot.
Q7. What do you get when you inspect Smalltalk?
Ans. An instance of SystemDictionary. SystemDictionary maintains all the names of classes, global variables and pool dictionaries in the system. Smalltalk is the sole instance of the class SystemDictionary.
Q8. How can I implement stack and queue operations in Smalltalk?
Ans. An OrderedCollection can be used to implement stack and queue operations. A stack is implemented by using addLast: anObject and removeLast methods for pushing and poping respectively. A Queue is implemented by using addLast: anObject and removeFirst methods.
Q9. What is the difference between an array and a set?
Ans. An array is a fixed size collection whereas a set can grow in size. An array has integer keys and a set is not keyed. A set enforces uniqueness upon its members.
Q10. What is the difference between protocol and category?
Ans. The methods of a class are organised in logical groups called protocols. Classes are grouped together into groups called categories.
Q11. What do I get from 1+2*3?
Q12. How do I stop the execution of a program?
Ans. By sending message halt.
Q13. What is the difference between = and == ?
Ans. = is a test for equality. == is a test for identity (same object). Except for some special classes like Symbol, Character & SmallInteger, two cases of a value (eg. 1.54) will not be the identical object, just one with equal value. The special cases are "special" and any variables that points to such an object will be by definition "Identical".
Q14. How do I iterate a collection?
Ans. By using the following enumeration messages.
1. do: aBlock
2. select: aBlock
3. reject: aBlock
4. detect: aBlock
5. collect: aBlock
6. inject: aValue into: aBlock
Q15. How do I use message perform: ?
Ans. perform: method is used to tell an object to execute a method whose name, rather than being hardcoded, is sent as a parameter. This means that the name of the message need not be know until runtime.
anObject perform: #methodNameQ16. What is the difference between detect: and select: methods for collections?
Q17. What is the result of sending collect: [ :each | each > 5 ] to aCollection?
Ans. A collection whose elements are true and false.
collect:aBlock returns a collection which contains the results of performing the same operation on each element in the receiver collection.
Q18. What do I use to concatenate strings efficiently?
Q19. What is superclass of Object?
Q20. What is subclassResposiblity method used for?
Ans. subclassResponsibility method is used to defer the actual implementation of a method.
Q21. What is shouldNotImplement method used for?
Ans. shouldNotImplement method is used to indicate that a subclass wants to undefine a method defined in a superclass.
Q22. What methods do I need to implement if I implement = method for an object?
Q23. What method do I need to implement for proxy objects?
Ans. doesNotUnderstand: aMessage
Q24. What are three pseudo variables used by VisualWorks?
Ans. self, super and thisContext.
Q25. What is the difference between SmallInteger and LargeInteger?
Ans. A SmallInteger has fixed number of bytes and a LargeInteger has variable number of bytes.
Q26. What is the difference between Symbol and String?
Ans. Symbols are similar to strings except that they are unique. This means that whilst one can create several string objects containing the same sequence of characters, there will only be exactly one instance of a symbol with a given sequence of characters.
Q27. What is the difference between Bag and Set?
Ans. A bag can have duplicates whereas a Set contains no duplicate objects.
Q28. What is the difference between chaining and cascading?
Ans. In Chaining, one message can follow on after another. In this case the second message is sent to the object which is the result of the first message.
anObject msg1 msg2 msg3In Cascading, each message is followed by a semicolon (;) and another message. In Cascading, subsequent messages are sent to the first receiver.
anObject msg1; msg2; msg3Q29. What is yourself method used for?
| aCollection | aCollection := OrderedCollection new add: 1; add: 2; yourself.In the above example add: returns its argument, not the receiver. Therefore, yourself message is sent to do the proper assignment of an OrderedCollection to aCollection variable.
Q30. What is the difference between isMemberOf: and isKindOf: methods?
Ans. isMemberOf: aClass returns true if receiver is an instance of aClass.
isKindOf: aClass returns true if receiver is an instance of aClass or one of its subclasses.
Q31. Where is the method new defined?
Ans. Method new is defined on instance side of class Behavior.
Q32. Why is an IdentitySet faster than a Set?
Ans. An IdentitySet is faster that a Set because == is a faster test than = .
Q33. What happens when I modify a collection while iterating over it?
Ans. Modifying a collection while iterating over it will give unpredictable results.
Employees do: [:anEmployee | anEmployee isProgrammer ifTrue: [ Employees remove: anEmployee]]
Above example will not work as expected since we are changing the size of Employees collection while iterating over it. Making a copy of the collection will avoid the above problem.
Employees copy do: [:anEmployee | anEmployee isProgrammer ifTrue: [ Employees remove: anEmployee]]
Q34. What is nil?
Ans. nil is the only instance of the class UndefinedObject and it is the default value for any new variable until a specific value is assigned to it.
Q35. What are pool dictionaries?
Ans. Pool dictionaries are created for providing access to pool variables to several classes that are not related by inheritance.
Q35+. What is a literal?
Ans. A literal is a piece of Smalltalk code that the compiler converts immediately to an object. Literals can be freely included in the programs just by typing them.
Literal type Example Character $s Symbol #name String 'David Letterman' Number 12 Boolean false UndefinedObject nil Array of literals #('apple' 12.9 name)Q36. What is MVC?
Q37. What is an aspect?
Ans. An aspect is a piece or subset of model's domain information.
Q38. What is a dependent?
Ans. A dependent is an object that is dependent on the information residing in a model. A dependent object is usually a view, a window, or another model and is contained in dependents collection of a model.
Q39. How do I add a dependent to a model?
Ans. aModel addDependent: aDependent.
This method adds aDependent to aModel's dependents collection.
Q40. How do I release dependents from a model?
Ans. aModel release replaces aModel's dependents collection with nil.
Q41. What is the changed/update mechanism?
Ans. The changed/update mechanism is used by a model to broadcast a notification of change to all its dependents.
Q42. What happens when I send changed or changed: message to a Model?
Ans. A changed/changed: message sends an update message to all of receiver's(model) dependents.
Q43. How do I implement an update method for a view?
Ans. The prototype for an update method for a view is
update: anAspect anAspect = anAspectOfInterest ifTrue: [ self invalidate]
Q44. What does invalidateRectangle: method do?
Ans. Invalidate messages initiate a view's redrawing process. invalidateRectangle: aRectangle invalidates only that area of the view defined by aRectangle.
Q45. How does a controller accesses keyboard events and mouse state?
Ans. By using its instance variable sensor, which references a TranslatingSensor.
Q46. What is a ValueHolder in VisualWorks?
Ans. A ValueHolder is a value model. It holds simple model objects like numbers, strings, etc. A ValueHolder is created by sending asValue message to any object or sending with: anObject to ValueHolder class
anObject asValue. ValueHolder with: anObjectA ValueHolder understands value/value: protocol. value message is used to access its value. value: anObject message is used to set its value to anObject.
Q47. What is a channel?
Ans. A channel is a value model that is used as a common access point for a changing value.
Q48. How do an object register interest in a ValueModel?
Ans. By sending onChangeSend: aChangeMessage to: anInterestedObject to a ValueModel. The advantages of this approach are:
(i) The interested object does not need to be a dependent of the value model.
(ii) The interested object does not need to implement an update method.
Q49. What is a dependency transformer?
A DependencyTransformer implements the behavior needed by an object to register interest in a value model. A dependencyTransformer is defined as a dependent of a value model and converts an update message sent to itself into a specific change message and sends this change message to the interested object.
Q50. How do I change the value of a ValueModel without triggering any updates?
Ans. 1. By using setValue: newValue method instead of value: newValue method. setValue: method replaces the value instance variable without sending update messages to dependents.
2. Remove the DependencyTransformer from the ValueModel's dependents. Send retractInterestsFor: anObject message to the ValueModel. This is done just prior to sending value: newValue message.
Using setValue: disallows all updates. retractInterestsFor: only disallows a specific update, allowing all others to proceed.
Q51. What is an AspectAdaptor?
Ans. An AspectAdaptor is a ValueModel whose value actually belongs to another object called the subject. The task of AspectAdaptor is to interface the general-purpose view object to just one aspect of the model(subject). An AspectAdaptor is created as follows:
| aa | aa := AspectAdaptor subject: Employee new. aa forAspect: #ssn.One can change the ssn of this employee by using aa value: aNumber. An AspectAdaptor needs to know which messages to send to the model to access and assign value to one of its aspect. In the above example value/value: messages sent to aa are converted into ssn/ssn: and sent to subject. forAspect: #ssn message sets the getSelector to #ssn and sets the putSelector to #ssn: The value method of AspectAdaptor is implemented as
value ^subject perform: self getSelectorQ52. What is the subject channel of an AspectAdaptor?
Q53. What is a PluggableAdaptor?
Ans. A PluggableAdaptor uses blocks to adapt a model to a view instead of using just selectors like AspectAdaptor. The blocks are called the getBlock, the putBlock and the updateBlock. These blocks get executed when a PluggableAdaptor receives value/value: and update messages. A PluggableAdaptor can be created as follows:
| pa | pa := PluggableAdaptor on: Employee new. pa getBlock: [ :m | m salary * 30 ] putBlock: [ :m :v | m salary: (v/30)] updateBlock: [ :m :a :p | .... ].On sending value message to pa, getBlock gets executed. It send salary message to employee(model), multiplies the result by 30 and returns it. In this way, one can perform more complex operations on model as a result of just sending the value message to pluggableAdapator.
Q54. What is an IndexedAdaptor?
Ans. An IndexedAdaptor is similar to AspectAdaptor except that its subject is a sequenceable collection and value/value: messages are dispatched to the subject as at:/at: put: . Q55. What is a SelectionInList?
Ans. A SelectionIinList is a selection model. It has two instance variables.
(i) listHolder instance variable is a ValueModel containing a sequenceable collection. listHolder acts as a model for SequenceView.
(ii) selectionIndexHolder instance variable is a ValueHolder with the index of the current selection as its value.
SelectionInList does not have any dependents. Both of its instance variables have two dependents : the SequenceView and the SelectionInList object itself.
Q56. What is a BufferedValueHolder?
Ans. A BufferedValueHolder is a ValueModel that references two other value models called its subject and trigger channel. When a BufferedValueHolder receives a value: message, it holds onto the new value and does not update the subject until trigger channel becomes true.
Q57. What is the difference between an IndexedAdaptor and an AspectAdaptor?
Ans. An IndexedAdaptor operates on a numbered instance variable in the subject, whereas an AspectAdaptor operates on a named instance variable.
Q58. What is a BlockClosure in VisualWorks?
Ans. Class BlockClosure implements the block notation in VisualWorks Smalltalk. In VisualWorks, blocks are close to being closures. One can declare variables local to the block, and the names of block parameters are local to the block.
Q59. What is the launcher in VisualWorks?
Ans. The launcher is the root of the VisualWorks development environment. Various development tools can be launched (or opened) from its menu.The launcher is implemented by VisualLauncher which is a subclass of ApplicationModel.
Q60. What is a SpecWrapper?
Ans. A VisualWorks component is a SpecWrapper. A SpecWrapper is wrapper that contains a widget, decoration for the widget, a copy of WidgetState object and ComponentSpec.
Q61. What is the difference between an active component and a passive component?
Ans. An active component is a VisualWorks component whose widget is a View and has a Model and a Controller. A passive component is a VisualWorks component whose widget is not a View and it does not depend on a model and a controller.
Q62. What is a widget?
Ans. A widget is a visual part responsible for the visual representation of a VisualWorks component.
Q63. What is difference between application model and aspect model?
Ans. An ApplicationModel is responsible for creating and managing a runtime user interface. An aspect model contains a single aspect of info and provides the model behavior for a single VisualWorks component. The relationship between an application model and an aspect model is that an application model contains one or more aspect models.
Q64. What is a keyboard hook?
Ans. A keyboard hook is a used for intercepting all the keyboard activity going to a VisualWorks component. It is a block which is evaluated just prior to the widget controller handling a keyboard event. Keyboard hook can be set as follows:
| comp | comp := anApplicationModel builder componentAt: #myComponent. comp widget controller keyboardHook: aBlock.Q65. What is the Transcript?
Q66. What is a dispatcher?
Ans. A dispatcher is used by a widget controller to dispatch notification and validation messages to the ApplicationModel. A dispatcher is an instance of class UIDispatcher.
Q67. What is a ComponentSpec?
Ans. A ComponentSpec describes properties and features of a VisualWorks component. ComponentSpec provides behavior for interface persistence in form of source code or text file.
Q68. What is a builder in ApplicationModel architecture?
Ans. A builder is an instance of class UIBuilder. It is used to construct a user interface according to the specifications. It also provides access to the runtime interface. Builder provides access to named components, the keyboard processor, the window and aspect models of a running application.
Q69. What is a FullSpec?
Ans. A FullSpec is a combination of a window spec and a spec collection. A window spec describes a window and a spec collection is a collection of component specs for all components of a window.
Q70. What is a builder's resource?
Ans. A resource is an object used by the builder to construct the interface according to the specs. Examples of resources are aspect models, menus, images, and labels. There are two types of resources:
1. Static resources - do not change during runtime.
2. Dynamic resources - change during runtime.
Q71. What is the builder's source?
Ans. The builder's source is an ApplicationModel that provides the necessary resources to a builder for building an interface according to the specs. It is kept in source instance variable of UIBuilder.
Q72. How does a builder caches resources?
Ans. A builder uses the following variables to cache resources.
1. bindings to cache aspect models reqired by active components.
2. labels to cache text labels.
3. visuals to cache visual components.
Q73. What is a lookPolicy object?
Ans. A lookPolicy object is an instance of one of the subclasses of the UILookPolicy abstract class. A lookPolicy object is used to create a VisualWorks component based on the componentSpec and the specific window environment's look and feel.
Q74. How can I change a builder's look policy?
Ans. By sending policy: aLookPolicy message to a builder.
aBuilder policy: MotifLookPolicy new.Q75. How is a VisualWorks component built?
Q76. What methods are used to access window, keyboardProcessor, named components and aspect models from a builder?
aBuilder window. aBuilder keyboardProcessor. aBuilder componentAt: #componentID. aBuilder aspectAt: #aspect.Q77. What is a keyboard processor?
Q78. What is the difference between preBuildWith: and postBuildWith: methods of ApplicationModel?
Ans. preBuildWith: aBuilder method allows anApplicationModel to make any changes to its builder prior to handling its full spec. postBuildWith: aBuilder method allows any final changes to the interface prior to opening.
Q79. What is the difference between postBuildWith: and postOpenWith: methods of ApplicationModel?
Ans. In the postBuildWith: method, the interface is completely built but it exists in memory only and window is not open. Whereas postOpenWith: method allows the application model to make any changes to the interface with the window open.
Q80. How do I close a window programmatically?
Ans. By sending the closeRequest message to anApplicationModel. closeRequest method sends an update: #closeRequest to anApplication Model dependents (window is one of the dependents).
Q82. Which message is sent to anApplicationModel for validation of a window close?
Q83. What do I mean by Parent application and subapplication?
Ans. The subapplication is the application model that manages the subcanvas. The parent application is the application model that provides the subapplication as an aspect model.
Q84. What is the SubCanvasSpec's clientKey?
Ans. clientKey is the message name which is sent to parent application to acquire the subapplication that manages the subcanvas.
Q85. What is the SubCanvasSpec's majorKey?
Ans. majorKey is the name of ApplicationModel subclass that builds and runs the subcanvas component.
Q86. What is the SubCanvasSpec's minorKey?
Ans. minorKey is name of the class method that returns a full spec describing the subcanvas interface.
Q87. How do I rebuild a subcanvas?
Ans. By sending one of the following messages to aSubCanvas.
client: appModel client: appModel spec: aSpec client: appModel spec: aSpec builder: aBuilderappModel is subapplication, aSpec is full spec of subcanvas, and aBuilder is an instance of UIBuilder.
Q88. What is ScheduledControllers?
Ans. ScheduledControllers is a global variable that refers to the only instance of ControlManager. It is responsible for managing all current window controllers.
Q89. How do I access active window?
Ans. ScheduledControllers currentController view
Q90. How do I access widget of a named component?
Ans. (anApplicationModel builder componentAt: #compID) widget
Q91. How do I give keyboard focus to a widget?
Ans. By sending takeKeyboardFocus to a VisualWorks component.
Q92. How do I change a component's label?
Ans. comp labelString: aString
Q93. How do I make a widget invisible/visible?
comp beInvisible. comp beVisible.Q94. How do I enable/disable a component?
comp enable. comp disable.Q95. Which method is used by aSequenceView to display its contents?
Q96. How do I use an arbitrary method to display contents in aSequenceView?
Ans. By sending displayStringSelector: aSymbol message to aSequenceView. aSymbol is the name of method used to display strings.
Q97. How do I change grid spacing of aSequenceView?
Ans. aSequenceView lineGrid: aNumber